How to make a picture frame for your home

You’ll need a little bit of extra wood for your frame.

We used oak. 

To make this picture frame you’ll need: 1×6 plywood 1x12x12 plywood 3x4x4 boardboard 4×12 wooden frames (see pictures)  1x2x2 x 6 wood boards (see picture) The first step is to cut the boards and frame.

The wooden boards are about 1cm thick and 3cm wide. 

Cut two 3cm boards into two 6cm pieces. 

You will need to cut one of these boards so that it will fit into the other, or cut it down to the size you want. 

(We cut one board down to 3cm and used this as a guide.) 

You should have about a dozen boards, which is the standard size. 

Now we cut the two pieces of the board that will form the frame. 

The plywood and the boards are held together by glue. 

This glue should be strong enough that you won’t damage it when you try to bend it. 

Make sure that you have a good glue gun, as you don’t want to break the boards. 

We used an old-fashioned iron on the inside of the frame so that we could easily remove the glue and use a chisel to remove the board. 

Use a chiseled edge on the plywood to hold the frame together, or you can use a piece of metal saw to cut it.

Once you have the frame, you can glue the other board into the middle of the ply, making sure that it is held in place by glue and that the glue isn’t too loose. 

Attach the frame to the wood frame with a piece, as shown in the picture. 

Take the frame and cut a hole in the middle. 

Put the frame into the wood and put a piece underneath the ply so that the piece will be on the bottom. 

Then you can add your nails to the ply and then finish the frame with the wood pieces.

You can glue a couple of the boards together to make more frame parts. 

Once you have your frame, it’s time to finish up. 

Grab a picture or two, hang them on the frame board and decorate. 

It will look like you just finished your Christmas picture.